After months of testing and data logging, Warren Diesel Injection has introduced their DIY (Do It Yourself) 6.7L Powerstroke 55% over injection pump barrel and plunger kit. This kit includes everything you need for the DIY install including barrel, plunger bolts, hats, & o-rings.
You will have to remove your injection pump in order to change the barrels and plungers. Just to reiterate, this is a DIY kit. We will be offering this as a service in the future. These have been tested on the 6.7L Powerstroke injection pumps, with a 2.6 pulse width tune and this pump never dropped any rail pressure.
Please Note:this setup can also be ran on stock tuning!
- Plunger bolts
- 2011-2014 Injection Pump
- 2015-2016 Injection Pump
- 2017-2019 Injection Pump
$200 core charge required. You must return your old complete barrels, plungers, and hats.
CP4.2 55% DIY Kit DISCLAIMER OF LIABILITY
NO LIABILITY FOR CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL WARREN DIESEL BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF VEHICLE USE, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THE CP4.2 55% DIY Kit, EVEN IF WARREN DIESEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN NO EVENT WILL WARREN DIESEL BE LIABLE FOR ANY VEHICLE DAMAGE, PERSONAL INJURY, DEATH, FINES, LAWSUITS, PROSECUTION, LOST PROFITS, ENVIRONMENTAL DAMAGE, GOVERNMENT, LAW AND REGULATORY VIOLATIONS OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM USE OR INABILITY TO USE THE CP4.2 55% DIY Kit.