Tyler W.
I love it!!! Super easy install, had it on in less than 10 minutes, and design is WAY better then factory. I will recommend this to anyone with a 6.7L.
Brandon M.
Fits great and looks great.
Robert H.
Supper easy to install I recommend it
Jesse J.
Very simple install and hose is way better
Theodore V.
The communication and order status I received is fantastic. I have yet to install the product but by the looks of it the quality is on the same level as your communications.
Thank you
Kolton B.
Worth the money easy installed
Bill K.
Fantastic product and customer service
Keep up the good work
Shawna B.
Super easy install as always.
Benjamin W.
Super easy install.. the directions are spot on and easy to follow. Looks great
Stephen P.
I purchased both the SPE Motorsport upper and lower radiator replacement/upgrades to be installed on a 2019 F-350. The problem is the heat in Phoenix, Arizona last year 35 days with daytime high temperatures above 110, last month the average temperature between high and nighttime low temp average was 99 degrees for the entire month of June 2024. The truck needs to lose heat from towing a 40 ft trailer at a minimum elevation of 1,000 ft in Phoenix to elevations on I-40 at 7,000 ft in Flagstaff, AZ. The 5-ply polyester-reinforced silicone material can withstand higher temperatures and higher pressures. The upper radiator hose eliminates the quick connect on the engine side of the radiator hose. The lower hose includes a billet aluminum coupler with a drain port to aid in completely emptying all of the coolant captured in the lower radiator hose. This eliminates ācoolant bathsā and messy coolant changes by offering a draining point for the entire engine coolant system. Adding a 6 ORB plug to the coupler allows you to remove the coolant without the typical anti-freeze bath. The high heat is hard on all fluids used in Modern trucks, with this latest radiator hose replacement, a higher quality hoses have been installed, ensuring many more trouble-free miles. While all this replacement work was done the anti-freeze in the radiator was flushed and replaced.
Kirk C.
Great product better then the original one thanks
Juan M.
Excellent precise fit.
I think coolant hose clamps should be the ones used for silicone hose not standard hoses.
ARNOLD J.
Installed SPE piping kit along with their hot and cold pipes, radiator hose, low temp thermostat, coolant hose reroute. Also did CCV reroute and Cat oil filter upgrade. Did this on my F250 and F350. No regrets. Excellent customer service. I did my due diligence in researching these mods. I was interested in performance, economy and impact on the 6.7l engine. SPE was an excellent partner in this. At the age of 80, I know value. SPE is value.
Byrd C.
Considerably better hose than the factory OEM thin wall hose.
PAUL M.
well designed and the fit and finish is a 10 out of 10
jamey m.
Easy install. Looks way better than factory hose.
Brett J.
Awesome product,great quality
Ronnie B.
Easy installation and the product definitely cleans up the engine bay. Awesome design and I will be purchasing more items from SPE.
Richard C.
Super easy instal , fit perfect
Charles B.
I will install it when I purchase the intercooler in the next two weeks
Cody P.
Beautiful design and works perfect
Kevin P.
This item is very heavy duty and adds style to my engine . It also fits between aftermarket piping
Zachary W.
Easy install, I like the look!
ryan w.
Easy to install. Fit and finish is amazing. Will definitely be buying some gear for my f250
Tyler G.
I came home one day to find a small pool of liquid under my truck. After some investigating it was determined to be from the quick disconnect end of the upper rad hose. After researching for a bit I knew I had my choice of upgrade in SPE! Man was I ever right in doing so. My only regret was not making the switch sooner! The hardest part of the entire process was taking the old stock hose off. Instal of the new hose and adapters, was a breeze. This is top quality stuff. You can tell its build with pride, quality and endurance in mind. Not to mention the engine bay got a major esthetic upgrade. I am currently deciding on what to get next for under the hood.
Rolando A.
Amazing product and easy installation, worth every single penny!
Tom C.
Could not ask for more, install was easy. Just need the SPE thermostat to make it complete.
John R.
Fittings work great! The hose fits decent, it seems slightly stressed but was promptly assured by the support team that there are no issues.
Jonathan K.
I would recommend this part to anybody that has a 6.7 L diesel. Not quite sure what Ford was thinking to make something that holds that much pressure out of plastic
Zach H.
Awesome quality and looks good. Thanks SPE
paul m.
Great fit and finish
Eric S.
Great product with a pretty easy installation. Love the way it looks compared to factory hose.
Austin W.
Extremely easy to install and fit perfect
Nicholas M.
Easy install love the way it looks
James P.
Went together perfectly, and looks way better than the OEM! Definitely recommend!! Pics of before and after attached.
Lewis M.
I watched a u tube video after I ordered it ,saying it was a difficult install so I was a little nervous.
Turns out it was super easy to install (15 - 20 minutes)and fit perfectly . Looks really cool too .
Garren M.
Great product! High quality!
Eric M.
Gets rid of the ugly stock radiator hose and replaces it with a smooth better flowing and looks awesome
Danny M.
Ordered the upper radiator hose for 2017 F250, was very happy with the fit and ease of installation. This is such a much better product than the original Ford part. Would definitely recommend to anyone thatās looking for a replacement option for the leaky Ford radiator hose.
Adam S.
Dresses things up a bit
Wes D.
Ordered the kit on a Wednesday and showed up on Friday! Kit is very well made and fit like a glove. Install was relatively easy and no more leaks. Thank you SPE!
Eugene K.
Watched a few videos. A few people said they had issues, but Hose went on without a problem. All the parts were made very good will buy more parts from this company as you can see I had another part to put on too. Next part I will buy the disaster prevention kit so far Quality is good.
Micah M.
Great product! The product arrived in a timely manner and installation was simple. Thanks SPE!!!
Jason W.
Hose is 100% better than the OEM and looks killer. The billet upper and lower pieces are great quality and the hose itself looks way better than the OEM piece with the ugly heat shield.
Joshua W.
Very easy install.! Highly recommend for functionality and looks. Cleaned the engine bay up majorly.! Very impressive
Richard M.
Wellā¦I am NOT a mechanic, but this install was EASY! I watched SPEās installation video and ran with it. The parts fit and went together just like the video said they would. Shipping was even faster than advertised!
Great job, SPE!
Bryan M.
Way better quality than the junk ford puts on. No need to stress about hose failure with this product.
bryon l.
Everything fit perfect. The new hose was actually a little taller than the original so it doesnt run across the intercooler anymore. It didnt have a new thermostat housing gasket but seems to not be leaking so far. Overall it seems to be a nice quality piece.
Roberto V.
Itās a great product, it was an easy installation, it took me less than 30 minutes and the results were amazing, itās 1000 times better than the stock upper radiator hose. I canāt wait to buy the SPE Lower and Upper intercooler pipes.
michael m.
All ways top shelf products, thanks guys
Jody F.
Very Very well designed
Jon C.
Have yet to install it, but certainly looks quality and can't wait to install!!!
Randall Z.
Love Snyder performance! Great place to upgrade your diesel engine !! Iāve now ordered a few items and been extremely happy every time! Definitely will be doing business with Snyder for a long long time !
Armando Z.
I installed the coolant re route and upper radiator hose at the same time,very easy install.Quality is outta the park way better then OEM.thatās why I keep coming back.
Tommy R.
Billet Thermostat is nice and went on easy. Hose pipe is quality. Radiator collar is well built but difficult to install and tech support was not much help. Hose clamps are too small and lightweight.
Evan B.
Very nice product that looks great and is well made. I have a lot more piece of mind now knowing that the plastic from the factory hose ends are now billet and cannot fail. The new hose is of superior quality as well.
Lincoln E.
Looks great and installation was easy thanks to their clear step by step directions. Shipping was super fast and they keep you up to date with tracking emails.
Andy G.
Great product, fit and appearance are awesome! I also changed thermostat, with the SPE high flow, low temp and decided to upgrade the upper hose! Fit on both were perfect! Thanks for a great product!!
Patrick R.
I like the secure fit of the upper radiator hose. I makes the engine compartment look neat.
Chris
Was great working with the SPE Team. Their products are amazing and the quality is top notch. In addition the packaging was very good to ensure everything came as it was designed.
Tim B.
SPE rocks!!!! I accidentally ordered the upper rad hose kit for my truck? I got in touch with Chance, and we had it all resolved in less than a week! Find that kind of customer service any where else and Iāll kiss your a$$! Part came early this morning and took me about 15 minutes to install! Great well manufactured products! Thanks guys!
Alan M.
GREAT PRODUCT. I LOVED
Adam S.
Easy install, fitās perfect
mark g.
great stuffā¦ waaay better than stock .!
GUADALUPE M.
This is one of the easiest install I've done and it looks awesome. Truck is running much cooler. Definitely a must have if you own a 6.7 Diesel
Scott B.
Fits just like factory but alot better quality. fast great service . And a great local business
Russell S.
Worked perfectly
Samuel C.
Great craftsmanship. Canāt wait to install and dress up and add performance to my ride .
Steve B.
Haven't installed yet. But ordering and delivery was easy! Parts look amazing!
Bryan B.
Aluminum fittings are great and fit perfectly but hose still collapses like OEM.
Paul H.
Quality ! Weāll worth the money and wait. Do it nice not twice.
John C.
Bought the kit for the 11-16. No instructions on the site. No worries itās very straight forward. Looks good, looks like a great upgrade. Only issue was fitment. The hose was not exactly long enough. So it looks kinda funky under the hood, but I made it work
Joseph P.
My factory hose had just begun to show signs of leaking at the quick connect on the thermostat housing so it was the perfect time to upgrade to the spe hose. My only thought is as seen in the picture you do have to put a little bit of tension on the hose to get it over to the radiator connect point. Could be something I did wrong as well but there have been no issues with it so Iām still more than satisfied.
Michael M.
Great product and installed easy in minutes.
Eli J.
Easy install and looks great!
Matt H.
Super easy install and looks clean! Way better quality than the factory junk which I had already replaced before. The machining on the billet thermostat housing is perfect and looks amazing!
Casey W.
Overall very nice only thing on my truck it was very tight meaning I could have used an extra 1/4 to 1/2 an inch for a better fitment! Would recommend!
Tytus B.
Super easy install and it hasnāt leaked a drop since. Excellent quality with SPE as always.
Kevin M.
Outstanding products across the board, but the SPE thermostat is a must have for anyone who loves that diesel power!
Your tranny will appreciate it.
I just replaced the hose at the same time.
Ismael n.
Product is great but for some reason I had a difficult time attaching band clamps on turbo side. I also have a disaster prevention kit from another company and it rubs on the tubing...problem i didnt have with stock one. Overall good product that could be improved.
Dakota A.
Pieces and Parts are very high Quality. Adapter for the upper radiator hose was slightly small so it had to be sanded down for the pieces to fit.
JOSE G.
SĆŗper easy to install
Tony P.
1st purchase for upgrading my 2021 F350 6.7. Very nice upper radiator hose replacement kit. Instructions were step by step and spot on. Getting the billet radiator adapter to snap in place took a bit of work even with knowing about lining up the top and bottom grooves.
It looks nice on the truck and I intend to start replacing the other hoses with SPE products.
Westen L.
Good product, took care of my leaking stock hose with the crappy push to connect fitting on the engine. Would have liked to see an additional recessed cut on the mating surface of the thermostat housing to accommodate an additional O-ring for better sealing.
john s.
Get rid of the coolant leaks at the upper radiator hose connection and at the thermostat connection for good. Fixes fords poor design. I installed the 175 degree thermostat at the same time and got way better oil and trans temps.
Bradley S.
OEM parts were prone to failure so I purchased this as preventative maintenance. Cleaned up the engine bay nicely. The new SPE silicone hose does not rub against the intercooler piping like the OEM did either. Two thumbs up!
Austin H.
Good design clamps could be upgraded
Thomas R.
Great experience all the way around
Always knew what status parts were in
Shipping was fast
Hose could have been a little longer but still fit well
Jacob V.
Love the stuff coming from SPE, stoked to see what else they come up with !
Luis G.
All I can say is Iām very impressed. Easy install while I did cold and hot side as well combined with the new thermostat.
Kenny R.
Looks great. Everything fit perfectly
Hunter M.
Good quality and far more superior then stock. 10/10 buy it wonāt regret
Matthew W.
Quality parts. Improved connections. Easy to install. I would recommend pairing this with the low temp high flow thermostat.
Noel J.
Upper radiator hose fit perfectly and looks awesome
Bill D.
Install went well, some people had mentioned they had difficulty with the radiator side connection. I installed it then put the hose on. There are 2 key slots that have to be lined up perfectly. Very easy doing it that way. I have several sPe products, very pleased with them all.
Chris H.
Great product and fit was spot on. Nice and easy to swap out.
RENE G.
Product is great quality. My only issue is if your needing your part right away spe is not the way to go. They nearly took 2months to receive my product.