Curtis P.
Fits perfect love the look
Bradley E.
My trucks spoil up time has decreased and I can feel the added performance.
Enno R.
2017 F-350 install
The craftsmanship of this piping kit is flawless, fitting and install was very easy. Combined with S&B open intake, the disaster kit, and cold side pipe this baby breathes and runs like a top. After install upgrade tunes to Modern Diesels SOTF tunes and it ran 10 times better then my previous tunes. Good job SPE!
Evan B.
Great looking product! I look foward to having the peace of mind of not worrying about the factory intake leaking!
Chad P.
I've purchased nearly the entire SPE catalog for my 2018 F250 Limited, and everything has been top notch. The intake piping kit in particular was particularly well made and fit perfectly with all my other parts. Had everything powdercoated wrinkle black to give the engine bay a stealth look and it turned out great! Installed an upgraded Mishimoto intercooler at the same time as the piping kit, and now the truck feels way more responsive, definitely picked up additional torque.
J L.
Thereās a lot of SPE in this picture. Every part is worth its weight in gold to me!
Jacom D.
Did not install it yet , I ordered the wrong lower air intake adaptor.
Edward B.
Very professional and the customer service was awesome. I haven't installed the air intake kit as of yet but I will upload pictures at a later time. By the way, the kit looks great and you can tell its a build that's quality made. Way to go SPE!!!
Hunter C.
Hardest part is gettin every things factory out. Did the ccv with catch can, colorant line reroute, thermostat with radiator hose. The intercooler piping was good only this I didnāt like was the hex head bolt for me were hard to get to. All and all is doable at the house. Very please so far. Also did S&B CAI.
Alex B.
I havenāt installed it yet but it looks great and shipped fast just like everything else Iāve bought from spe has beat my expectations
James N.
Great kit, however, it would be nice if they supplied new intake manifold o-rings instead of telling you to use the old ones. For $1250 one would think they could throw in the $20.00 o-rings.
Nicholas H.
Took a while to get but the product is worth the wait once again spe has hit this out of the park fit and finish is amazing the instructions are very good awesome product
Cody F.
Everything fits perfectly and looks amazing on my 2014 f350
Intake piping kit goes very nicely with all my other SPE parts especially coolant re-route kit
Nic M.
Easy install, works awesome. But expect a small belt "chirp" when you turn the key off it just happens by nature of kit. Otherwise this kit is awesome
Corey C.
Really noticed more power along with that amazing whistling sound you get from the turbo, i was holding off on buying this kit bc of the price but now I wish I would of bought it right away, Itās worth every penny! Thanks again SPE
Mike M.
Haven't installed it yet I know it's fitment will be great as all your products are I personalized it and anodized it to match what's inder the hood already looks great I sent a photo of my custom work to your product and I know your product will finish bringing the beast alive thank you for your precision engineering
Dylan L.
I am really impressed with SPE products I will absolutely be purchasing many more in the future! All around 10/10!!
Raul F.
I love the product looks good and it performs great And you can feel definitely more horsepower !!!!!!!!
Allen S.
Excellent customer service and it fits perfectly and the staff is always great with asking about the quality and if your happy with the product you have purchased I love SPE and the products they have and will.be a life long customer
Tim B.
Great product! Fits great and easy install! SPE all the way!
Kevyn James K.
Fit and finish of parts were good.
Wish there had been more clearance between the turbo cold intake and the exhaust manifold collector. Definitely a tight fit.
Itās definitely a good upgrade it allows the turbo to breath and be more responsive to throttle input.
Also makes for a cleaner engine bay.
John T.
overall I liked it but on the intake y pipe the elbow to flange distance should be increased 1/2 inch and it will fit the 11-14 with the dual inlet turbo better
Virgil A.
I'm very satisfied with the pipeing kit. It looks great and runs even better
Jared H.
Love the product. Looks great under the hood, definitely cleaned up the engine bay. I would suggest getting the coolant reroute kit for sure and the ccv reroute kit. I was not aware that it didnt have a port for the ccv so I didnāt order the ccv kit but after installing I will be ordering it next. The clamp on the bottom side of the cac pipe is super tight. But it all fits, had to push over the power steering reservoir but not a big problem. Took about 4 hours total getting everything off and new parts put on. Well worth the 4 month wait to get it. Happy with the looks and performance. Also added the hot side pipe for a matching look. Over all happy with the product. Picture was taken before cleaning everything after install.
Zach F.
Quality parts that work period. Temps dropped 20+ degrees. Everything fits perfect. Only issue I ran into was the t bolt clamp for the cold side reduced to intercooler. That clamp just barely fits, just in case someone doing it reads these reviews it might help you.
Armaund G.
GREAT addition.
Awesome spool up and response!!!
A must have.
Joseph P.
As Iāve come to expect from buying products from spe for my 6.7 over the last couple years the kit went in without any problem.
Jeff I.
Quality products, very satisfied with the results.
michael b.
Let's start off by saying the customer service here is awesome! I usually get a response thru email within 5 to 10 min. The kit itself is awsome! I wish I would have bought sooner. I ended up powdercoating the pipes to give it that extra pop! Definitely recommend buying!
Manny G.
Best of the best!
Franco G.
SPE ftw! Love it !
Robert P.
Great products and quality. Pretty easy install and really cleans up the engine bay. A whole lot better response when you get on it, looks bada$$. SPE products are great quality and well worth the money.
Troy F.
It really looks good on the engine.
Quality product
Troy F.
Seems like a solid component.
Manley b.
Super easy to install love how easy it is to get to everything after it is installed super clean look
Chayce L.
Fitment is perfect! Install was much more smooth than other competitor piping kits Iāve installed, price point is good and was still able to utilize the S&B intake I already had installed. Great product SPE!
Trent B.
Good fitment easy to install and quality products
Trevor D.
Was definitely worth the wait all clamps and hardware are very quality and everything fit perfect, definitely feel a different in the truck and turbo is definitely louder. Very happy with the parts and customer service would recommend this kit to anybody over any other kit!
Jake C.
The quality is amazing along with the throttle response and power gain. Definitely worth the money and wait best intake kit out there nothing comes close to SPE and there products.
Brandon B.
After long awaited anticipation I finally got the intake piping kit and I am absolutely pleased with it in every way. The truck acts night and day different ND the peace of mind that everything is now aluminum and not plastic if refreshing. Wish I would have done it sooner, but it is absolutely worth it. Thank you SPE for awesome products and look forward to future purchases.
Joseph R.
Love it wish it had 8mm head bolts not Allen
Kevin M.
Excellent product!!!
Cleans up the bay nicely and opens up that super congested apparatus of an intake!
Mike Y.
Fit perfect and pretty easy install. Love the fact I could keep the s&b intake with this spe set up
Matthew M.
Very happy with kit everything fits as expected! I notice quicker throttle response, could be because I cleaned the 2 sensors (cold side, intake)
the 6-7week wait time was beyond ridiculous.
The only other complaint is the band clamps need to be longer.
Preferably all of them. It was Beyond frustrating that the cold side band clamp.
(Yes I used the appropriate ones for the turbo and āYā pipe.)
And I wish there was a bracket to use for the power steering reservoir.
Brandon W.
Fitment was great and looks really good sits close to the powersteering reservoir but dosen't look like it will be a problem you can hear the turbo a little more and my egts went down and boost went up and so did my mpg really happy about the kit and highly recommended it
Daniel H.
SPE thank you for your awesome service and products. Very happy with my purchase of the intake piping kit looks great sounds awesome and performance is outstanding. You can definitely hear that turbo spool and opened everything up for sure. The installation was made easy do to the very detailed instructions. Definitely recommend SPE for all your performance upgrades for your trucks.
Jonathan G.
Went together pretty easy but looks great and need to buy more spe parts!
David B.
I ordered this kit and knew going into it that the delivery time would be longer than normal. It took just under six weeks to receive my kit at which point I was very disappointed. The intake y was full of casting sand, aluminum shavings, and the black coating had a couple of relatively large chips. I emailed SPE and they had me a new intake y in the mail the next day. The new intake y was in much better condition however the black coating still had a small chip. I decided to go ahead with the install anyways. The fit of the kit is quit good and required no plastic trimming. The SPE intake design definitely improved throttle response and top end power in my case. My only complaints would be that the t-bolt clamps are the absolute smallest size that would work making them much, much harder to install than if a slightly larger clamp would be used. Finally the Allen head bolts look nice but are much harder to install/torque than a traditional flange bolt. The difference is significant enough that Iāll be purchasing stainless metric flange bolts to replace the provided Allen bolts in the near future. Otherwise Iām content with the customer service provided by SPE and the intake kit works as designed.
Neil G.
Install was pretty straightforward as long as your reading correct instructions!! Once I cut the top air inlet of the dual boost gt32 turbo per the instructions everything went on and fit great. Thanks SPE for rereleasing this to fit the 11-14 turbo trucks so I can buy and build my truck in stages!!
Armando M.
Product is above all others! Down fall was the directions were missing torque specs and wasn't really sure what clamps went on which boots?
John G.
I love SPE products everything they sell is of great quality, full piping kit looks amazing and fit perfect ccv reroute fits great as well , and high flow thermostat is working perfectly.
Noah H.
This purchase made under the hood look CLEAN. Much better air flow, easier to install than to take stock off.
Matthew G.
Kit is awsomeā¦I sanded the cast down as I like the glassy powder look and didnāt want the coating to be rough. improvements that could be made, provide longer mounting bolts for the intake mounting.provide larger clamps for the intake boots, other than that the install was super staight forward and fitment was great.
Kirk H.
Very well engineered to fit perfectly. Cleans up the engine bay
David M.
It definitely made a difference in fuel and performance
Shane H.
Kit was very easy to install. Love the look of it. Could tell a difference with peddle response on first test drive. All I can say is wow. Run a lbf tune that would hit a little smoke when doing heavy Acceleration, that has gone away. Can on assume from the extra air the motor is taking in now. The SPE kit fits perfect with S&B cold air intake. Would recommend to anyone wanting to get rid of clunky plastic intake.
robert m.
Very easy install, looks and performs great. You won't find a better quality.
Slayde W.
Good kit! No problems. Quality stuff!
Jerry P.
Great product and customer service!
Nick H.
I have a 2011 F550 4X4 6.7L powerstroke from factory they tune the engine down to 300 hp.
Truck pulled ok, I installed the intake kit, pullās real good, no tune on it yet, but pretty happy with it now, if you want top shelf product SPE is the place ! you want to buy cheap shit from someone else, thatās what you will get!!
Derek A.
Looks nicely engineered only two problems I had was #1 didnāt receive my raw piping and hot side pipe kit until 6 months after ordering it not sure why but who knows #2 went to install it and got everything taken apart to find out that the EGR has to be off the truck for the Y pipe to fit with MAP sensor installed so had to put everything back together so not sure if it performs better yet.
Kenny R.
Everything looks perfect! Itās a great upgrade to the truck. Three of the banding straps were too small and wouldnāt fit over the hot side boots. Had to get some from the hardware store. But other than that, everything was great
Nic M.
Love the kit! Shipping took a minute but worth the wait!
Reuben C.
SPE has great products. Lots of research put into the products. Intake fit well. Institutions were clear.
Andrew R.
Kit is nice, As others have said the cold pipe pushes on the power steering reservoir (I think every manufacturer has this problem) would be nice to see a small bracket that helps relocate the reservoir over a few inches. And also at idle my dipstick tube are vibrating like crazy, maybe a stiffer dipstick tube bracket to help with this. Overall it's a nice looking kit, easy install.
Nick R.
SPE is the best hands down!! You canāt go wrong with this product it looks and sounds amazing!! Best looking on the market! And I love that they make the correct adapter to mount up to my S&B intake so I donāt have to purchase a different one!
Arthur S.
My stock intake had so much carbon build up that it was choking my engine's power out. The SPE intake piping kit unleashed that power! Wow, what a difference!
Stu E.
Great product with excellent quality and fit. They only thing I changed during the install is the Y-horn mount bolts from Allen cap screws to stainless bolts, I like the finished look of the cap screws but just had a hard time with the back ones. Being a helicopter mechanic I didn't want several different sized bolts. Very minor issue.
Jay J.
Quality parts make the install easy..
Stephen L.
Good quality as usual from SPE instructions were great definitely an improvement over stock, only issue is pipe pushed power steering reservoir have to try and relocate it, also the dip stick mount is not very ideal could be better designed.
Randy A.
I just installed the intake kit not too bad to install the clamps are a little bit tight tolerance but overall very happy. Also installed a outside intercooler pipe the coolant line cleanup kit, upper radiator hose, low temp high flow thermostat, disaster prevention kit and injector return repair kit. Keep the parts coming SPE parts rock!
Zachary B.
Great products and info on all of it.
Michael I.
I have purchased pretty much every SPE product that is produced for my 2019 F-250 and I have to say, their products are phenomenal. Everything from the CCV reroute kit to the disaster prevention kit, to the intercooler piping has fit very nice and easy to install. I have a few more small items that I have installed as well. The emperor turbo kit has been ordered. Iām sure it will be top notch as well. Thanks for making the best truck parts guys! Keep up the solid work.
Darin C.
I am so impressed on how this kit performs. Super easy to install.
Lenny W.
Took awhile to get because of high order numbers but it was worth the wait. Great fit and finish.
Freeman K.
Itās was pretty easy to put it in the truck took about an hour very Satisfying
Donald S.
Fit good and looks way better than stock intake manifolds
Terry C.
After waiting 4 and a half months it finally arrived. The installation was pretty straightforward and product looks great. It really helps cleans up the engine bay. Just wish the cold air intake would have arrived at the same time.
Bruce S.
I really like the kit. I had trouble with oil dipstick tube and getting it to fit just right. I ended up finding direction on SPE website. After following the advice on the website it fit perfectly.
Ryan K.
Love the products from SPE. The Y bridge intake manifold plus the hot and cold side boost tubes are a much better product than factory and look a lot better as well. engine bay cleaned up nice with this addition. only down side to the kit was the T-clamps are a bit short which makes getting the nuts started a bit of a pain with everything being so congested in the bay. Have yet to take it out on a road trip but I am sure ill see lower intake temps and have a little faster throttle response. Thanks again for the great products and keep coming out with new and better additions.
sid s.
A great piping kit love the sound and the look couldnāt be more pleased
Curtis T.
Great product. Truck runs great. You can not get a better product Thank you
Edye R.
Once again very pleased. Perfect fit and looks amazing!!!
Edye R.
Looks great and fits perfect!!! Love the space it has now. Waiting for it paid off!! Definitely recommend this intake kit.
Stanley F.
I love the parts I haven't installed it yet but I'm hoping it looks and performs like I
believe it will